Gasoline Siphon Hose for Portable Fuel Transfer

Product Description: An Efficient Hand Fuel Pump for Daily Simple and Emergency Needs

Specifications: - Material: Rubber / PVC / Metal - Outer Diameter of Hose: 10mm / 0.39" - Thickness of Hose: 2mm / 0.08" - Length of Longer Hose: 1.2 m / 47" - Length of Shorter Hose: 0.8 m / 31"

Note: The two hoses are in different sizes. The longer hose or the shorter hose can be placed at the source container or the target container based on your use condition.

Method 1 - Gravity Required: 1. The source fluid should be 11 inches or more higher than the target one (the greater the height difference, the better the effect). 2. Put the metal clips on one end of each hose, then connect the hoses to both ends of the pump bulb. 3. Secure the end of the hose and pump bulb with clips, ensuring no fluid leakage. 4. Fix the hose to the container with the hose retainer, keeping the hose in the container and preventing it from slipping out. 5. Put the input hose into the source fluid, with the black arrow on the pump bulb pointing to the exit flow direction. 6. Squeeze the pump bulb 3 to 4 times. 7. When the liquid comes close to the pump bulb, place the outlet hose into the target container. Then, the liquid will keep flowing naturally. 8. When the fluid level is too low at the bottom of the source container, the pressure will not be enough to keep the fluid flowing naturally, and you will need to keep squeezing the pump bulb by hand to finish the pumping job.

Method 2 - No Gravity Required: 1. There is no height difference required between the source container and the target container, but you need to KEEP squeezing the pump bulb BY HAND to finish the job. 2. Put the clip on one end of each hose, then connect the hoses to both ends of the pump bulb. 3. Secure the junction of the hose and pump bulb with a clip, ensuring no fluid leakage. 4. Fix the hose to the container with the hose retainer, keeping the hose in the container and preventing it from slipping out. 5. Put the input hose into the source fluid, with the black arrow on the pump bulb pointing to the direction of flow. 6. Squeeze the pump bulb 3 to 4 times. 7. When the liquid comes close to the pump bulb, place the outlet hose into the target container. 8. Then, keep squeezing the pump bulb continually with your hands to control the flow rate until the transfer job is done.

Self-check Points When Siphon Pump Can't Work Normally: 1. The source container is placed HIGHER than the target container when using the "Gravity Required" way. 2. Both the source container and the target container are not in a sealed state. 3. The indicator arrow on the pump bulb is not pointing towards the exit flow direction, down to the target container. 4. Both of the hoses are knotted or twisted together. 5. The gas has not been exhausted from the hoses before using. 6. The ends of the two hoses are not kept inside the containers during use, but just on the surface.

What You Get: - Pump Bulb x1 - Hose (31" / 47") x2 - Metal Clip x2 - Hose Retainer x1

Premium Quality Rubber: The pump bulb is made of high-quality rubber, thick and sturdy, with a built-in stop valve to prevent backflow of the fluid for siphoning liquid flow quicker and faster. The two flexible PVC transparent hoses allow for visual liquid flow progress and are high-temperature and corrosion-resistant, suitable for long-term use.

Clip and Retainer Use: The two metal clips are for fixing the hoses in place with the pump bulb, preventing slippage or leakage. The adjustable hose retainer is for keeping the hose standing in the container or receiver, avoiding slipping out and allowing one-handed operation.

Easy and Safe Siphon Pump: Say goodbye to the dangerous and inefficient mouth suction way. Just connect the hoses to the pump bulb, with the black arrow pointing towards the fluid flow direction, put the upper hose into the source tank, and a few squeezes of the bulb will get the fluid started flowing. Then, put the lower hose into the receiver tank, and the fluid will flow automatically (the source fluid must be 11 inches or more higher than the receiver).

Efficient Manual Siphon Pump: The hand siphon hose pump is suitable for gasoline, oil, water, diesel, and other common liquids, ideal for emergency transfer. It also suits fish tanks, aquarium tanks, small fountains, and small air cushion swimming pools for water transfer. It is not suitable for edible oil, drinking water, saltwater, and any chemical liquids.

Multi-Use Manual Transfer Pump: The lightweight hand siphon fuel pump is suitable for simple daily use and medium and small-type equipment without an anti-theft filter net, such as brush cutters, lawn movers, hedge trimmers, snow blowers, motorcycles, scooters, ATVs, and lawn tractors, but not for large truck types.

product information: